TECHNICAL SUPPORT

Setup The Network in WinNT4.0


1.
Click Start and select Settings --> Control Panel

20.gif (6729 bytes)


2.
Double-click Network.

21.gif (8458 bytes)


3.
Click Service.

22.gif (5044 bytes)


4.
Select the Remote Access Service and click Properties.

23.gif (6560 bytes)


5.
Click Configure.( For example: TI 56000 Voice Modem connect to COM1 )

24.gif (3783 bytes)


6.
Select Dial out only or Dial out and Receive calls. Then click OK.

25.gif (2843 bytes)


7.
Click Network.

26.gif (3711 bytes)


8.
Select TCP/IP and click OK.

27.gif (2343 bytes)


9.
Click Countinue.

28.gif (3776 bytes)


10.
Click Close.

29.gif (6655 bytes)


11.
Click Yes.

30.gif (2447 bytes)


12.
Restart your computer to enable the Network.


TECHNICAL SUPPORT